歡迎訪問濟南金昊化工有限公司網站!
全國咨詢熱線:13869119097

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

新聞中心

所在位置:首頁 > 新聞中心 

使用氫氧化鉀配置除油劑的三點注意事項

發布來源:http://m.jsyjs.net    更新時間:2023-02-15 點擊數:48

氫氧化鉀在進行使用的時候可以用來去除很多重油的物質,但是其實我們也都是知道氫氧化鈉本身在進行使用的時候其堿性就是比較強的,所以在進行使用的時候?qū)τ谑植康葌σ捕际潜容^嚴重的,而使用配置的除油劑進行使用的時候同樣也是會有更好的而是用效果。
Potassium hydroxide can be used to remove a lot of heavy oil substances when it is used, but in fact, we all know that sodium hydroxide itself is relatively alkaline when it is used, so it will also cause serious injuries to hands and other injuries when it is used, and the use of the configured oil remover will also have a better effect when it is used.
1、我們在進行配置的時候先需要準備好850g水注入到除油池當中準備使用,然后再往里面依次添加進去合適劑量的氫氧化鉀,還有一些硫酸鈉、海藻酸鈉等物質,都投放結束之后就可以使用攪拌裝置對其進行攪拌知道均勻。
1. When configuring, we need to prepare 850g of water to be injected into the oil removal tank for use, and then add a proper amount of potassium hydroxide, some sodium sulfate, sodium alginate and other substances into the tank in turn. After all are put in, we can use the mixing device to stir them until they are even.
2、然后再單獨準備一個塑料桶倒入進去水還有助劑等攪拌均勻知道其中的物質完全融化之后就可以將塑料桶當?shù)牡谷雱偛艛嚢杈鶆虻爻统禺?dāng)中,這樣一個可以進行使用的除油劑就制成了。
2. Then prepare a separate plastic bucket and pour it into the water and additives, and mix them evenly until the substances in the bucket are completely melted. Then pour the Chinese in the plastic bucket into the oil removal tank that has just been stirred evenly. This is a kind of oil removal agent that can be used.
用氫氧化鉀
3、大部分的金屬在進行除油的時候只需要在除油劑當中浸泡10分鐘左右,如果有比較重的油污在輕輕地擦拭一下,差不多就可以達到一個比較好的除油效果,因?yàn)槠鋵?shí)很多的工業當中使用的一些機械配件等因?yàn)殚L期在潤滑油的作用下是會有比較重的油垢的,所以一般這一種的也是需要經常對其進行清洗確保使用性能良好。
3. Most metals only need to be soaked in the degreasing agent for about 10 minutes when they are degreased. If there is heavy oil stain, you can almost achieve a good degreasing effect by gently wiping it, because in fact, some mechanical parts used in many industries will have heavy oil stain under the action of lubricating oil for a long time, Therefore, in general, it is also necessary to clean it frequently to ensure good performance.
使用氫氧化鉀配置除油劑來進行使用的時候其實效果往往也都是非常好的,而且因?yàn)槠鋲A性是沒有氫氧化鈉那么強的,所以在進行使用的時候?qū)τ谑植康鹊膫σ捕际潜容^小的。對此產品,您有疑惑或者需求就來我們網站http://m.jsyjs.net咨詢!
When potassium hydroxide is used as a degreaser, the effect is often very good. And because its alkalinity is not as strong as sodium hydroxide, the damage to hands and other parts is also relatively small. If you have any doubts or needs about this product, please come to our website http://m.jsyjs.net consulting service

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

掃描二維碼,關注我們

13869119097

全國客戶服務熱線

濟南金昊化工有限公司

備案號:魯ICP備19046505號-2